| NH677 |
On packaging containing dressed seeds, the following label is necessary: "Sweep up and remove spilled seeds immediately ". |
– |
– |
| NH678 |
On packaging containing dressed seeds, the following label is necessary: "This product is poisonous for small mammals. For this reason, do not leave seeds exposed. Switch off the dosing equipment on time before lifting out the shares to prevent trickling afterwards". |
– |
– |
| NH680 |
On packaging containing dressed seeds, the following label is necessary: "Do not allow treated seeds and remains such as broken grain and dust, empty containers or packaging or rinsing liquid to come into contact with water. This also applies to indirect entry via the urban or agrarian drainage system and to rainwater and sewage canals". |
– |
– |
| NH681-3 |
The following labelling shall be placed on treated seed packaging: No sowing of treated seed permitted in case of forecast wind with an hourly average wind speed at a height of 2 m higher than 5 m/s. To evaluate the wind speed, the forecast on the internet site of the German Meteorological Service of the nearest agricultural meteorological station should be consulted up to 72 hours before sowing. |
– |
– |
| NH682 |
On packaging containing dressed seeds, the following label is necessary: "The treated seeds, including any dust they contain, or dust which is produced during the sowing process, has to be incorporated completely into the soil". |
– |
– |
| NH684 |
On packages of treated seeds the maximum seed rate per hectare must be indicated as specified in the authorisation. For a combination of several seed protectants, the lowest admissible seed rate must be stated. |
– |
– |
| NH685 |
On packaging containing dressed seeds, the following label is necessary: "Treated seeds may only be sown by using a mechanical seeding machine". |
– |
– |
| NT699-1 |
The seed treatment shall only be performed in professional seed treatment facilities, which are registered in the index of "Seed Treatment Facilities with Quality Assurance Systems to Minimise Dust" of the Julius Kühn-Institute (visit the homepage of the Julius Kühn-Institute). |
– |
– |
| NT712 |
At the beginning of the production process it must be demonstrated and documented for each formulation that the amount of active substance which might be abraded by dust (Heubach a.s. value) does not exceed 0.1 mg tefluthrin per 100.000 seeds. This evidence must be submitted and documented for all formulations once every calendar year or at the beginning of the treatment season after intermission of the production. Retention samples of treated seeds from the production process allowing for the d |
– |
– |
| NW470 |
Where applicable, fluids left over from application, granules and their remains as well as cleansing and rinsing fluids must not be dumped in water. This also applies to indirect entry via the urban or agrarian drainage system and to rain-water and sewage canals. |
– |
– |
| SE1201 |
Wear tight fitting eye protection when applying/handling the product. |
– |
– |
| SF6143 |
Protective gloves, a protective suit against pesticides and sturdy footwear must be worn when handling dressed seeds. |
– |
– |
| SF6162 |
Protective gloves, a protective suit against pesticides and sturdy footwear must be worn when handling dressed seeds. |
– |
– |
| SF635-1 |
While cleaning the seed treater wear tight fitting eye protection. |
– |
– |
| SF640 |
While cleaning the seed dressing appliance protective gloves (plant protection) and a protective suit against pesticides must be worn. |
– |
– |
| SS1201-1 |
Protective gloves (plant protection) must be worn when handling/applying the product. |
– |
– |
| SS2204 |
Wear a protective suit for plant protection products and sturdy shoes (e.g. rubber boots) when applying/handling the product. |
– |
– |
| SS6201 |
Wear a rubber apron when applying/handling the product. |
– |
– |
| ST1202 |
Wear particle-filtering half mask FFP2 or half mask with particle filter P2 (identification colour: white) according to the BVL guideline "Personal protective equipment for handling plant protection products", current version, when applying/handling the product. |
– |
– |
| ST1261 |
Wear particle-filtering half mask FFP2 or half mask with particle filter P2 (identification colour: white) according to the BVL guideline "Personal protective equipment for handling plant protection products", current version, when bagging the seeds. |
– |
– |
| ST1271-1 |
Wear particle-filtering half mask FFP2 or half mask with particle filter P2 (identification colour: white) according to the BVL guideline "Personal protective equipment for handling plant protection products", current version, when cleaning the seed-dressing equipment. |
– |
– |
| ST131 |
Wear particle-filtering half mask FFP2 or half mask with particle filter P2 (identification colour: white) according to the BVL guideline "Personal protective equipment for handling plant protection products", current version, when filling the sowing machine and while sowing the treated seeds. |
– |
– |
| VA283 |
Only for use in commercial, stationary seed dressing plants with fully automatic and completely closed bagging devices. |
– |
– |
