| NW800 |
Application not allowed on drained areas between 1 November and 15 March. |
– |
– |
| NW706 |
Between treated areas which have an incline of more than 2 % and surface waters - including periodically but excluding occasionally water-bearing surface waters- there must be a buffer zone under complete plant cover. The buffer zone's protective function must not be impaired by the use of implements. It must be at least 20 m wide. This buffer zone is not necessary if: -sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water o |
– |
– |
| NW607-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from su |
– |
– |
| NT170 |
The wind speed must not exceed 3 m/s when applying the product. |
– |
– |
| NT146 |
Travelling speed must not exceed 7.5 km/h during application. |
– |
– |
| SF275-EEOS |
For the period after application up to and including harvest in fruit-tree crops and cane fruits, it must be ensured that long-sleeved working clothes and sturdy footwear are worn during successive work/inspections with direct contact with the treated crops/areas. |
– |
– |
| WP747 |
Depending on the crop, cultivar and cultural method, damage cannot be excluded to the crop to be treated. Therefore, crop tolerance must be tested under typical working conditions before the product is used. |
– |
– |
| NT145-1 |
The product must be applied using a water volume of at least 300 l/ha. The product must be applied using equipment which is registered in the index of 'Loss Reducing Equipment' of 10 Sep-tember 2013 (Federal Gazette AT 23.10.2013 B4) as amended, at least in drift reduction class 90 %. Deviating from the specifications in the index of 'Loss Reducing Equipment', the terms for use must be observed for the entire area to be treated. |
– |
– |