| NT146 |
Travelling speed must not exceed 7.5 km/h during application. |
– |
– |
| NT152 |
The product may only be used on areas which have been included in an accurate application plan which contains details of the seeding date, the planned and the actual timing of application, the application rate, the amount of water and application techniques. The operator must carry the plan with him during treatment in case of a check. |
– |
– |
| NT153 |
If they have requested to be informed, neighbours who may be exposed to drift must be informed of the planned application at the latest one day before plant protection products containing clomazone are used. |
– |
– |
| NT145-1 |
The product must be applied using a water volume of at least 300 l/ha. The product must be applied using equipment which is registered in the index of 'Loss Reducing Equipment' of 10 Sep-tember 2013 (Federal Gazette AT 23.10.2013 B4) as amended, at least in drift reduction class 90 %. Deviating from the specifications in the index of 'Loss Reducing Equipment', the terms for use must be observed for the entire area to be treated. |
– |
– |
| WP744 |
Damage possible to adjacent woody plants. |
– |
– |
| WP740 |
Take care of adjacent crops, since damage is possible. |
– |
– |
| WP734 |
Damage is possible to the crop. |
– |
– |
| WH9161 |
The instructions for use must include a summary of weeds which can be controlled well, less well and insufficiently by the product, as well as a list of species and/or varieties showing which crops are tolerant of the intended application rate and which are not. |
– |
– |
| NT154-1 |
When using the product, a buffer zone of 50 m must be kept to urban areas, home and allotment gardens, areas with known clomazone-sensitive crops (e.g. vegetables, berries) and areas which are intended for the general public. This buffer zone must also be kept to areas intended for production according to Regulation (EU) No 2018/848 and/or according to the Regulation on Foods for Specific Groups and/or Regulation (EU) No 609/2013. This distance can be reduced from 50 m to 20 m if the product is |
– |
– |
| NW642-1 |
The product may not be applied in or in the immediate vicinity of surface or coastal waters. Irrespective of this, the minimum buffer zone from surface waters stipulated by state law must be observed. Violations may be punished by fines of up to 50 000 EUR. |
– |
– |
