| NT140 |
Application of the product with a water application rate of less than 150 l/ha has to be conduct-ed with a field sprayer that is listed with a drift reduction class of at least 50 % in the list of "loss-reducing devices" in the first announcement on the entry of tested device types in the descrip-tive list pursuant to Section 52 (2) of the Plant Protection Act of September 10, 2013 (BAnz AT 23.10.2013 B4), as amended. The conditions of use for application with a drift reduction of at least 50 % |
– |
– |
| NW605-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from su |
– |
– |
| NW606 |
The only case in which the product may be applied without loss reducing equipment is when at least the buffer zone stated below is kept from surface waters - except only occasionally but including periodically water bearing surface waters. Violations may be punished by fines of up to 50 000 Euro. |
– |
5 m
|
| NW701 |
Between treated areas which have an incline of more than 2 % and surface waters - including periodically but excluding occasionally water-bearing surface waters - there must be a buffer zone under complete plant cover. The buffer zone's protective function must not be impaired by the use of implements. It must be at least 10 m wide. This buffer zone is not necessary if: -sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water |
– |
– |
| VA263-1 |
No outdoor use of the of the plant protection product with handheld equipment. |
– |
– |
| SF276-EEGE |
For the period after application up to and including harvest in vegetables, it must be ensured that long-sleeved working clothes, sturdy footwear and protective gloves are worn during successive work/inspections with direct contact with the treated crops/areas. |
– |
– |
