| NW706 |
Between treated areas which have an incline of more than 2 % and surface waters - including periodically but excluding occasionally water-bearing surface waters- there must be a buffer zone under complete plant cover. The buffer zone's protective function must not be impaired by the use of implements. It must be at least 20 m wide. This buffer zone is not necessary if: -sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water o |
– |
– |
| WP734 |
Damage is possible to the crop. |
– |
– |
| WP740 |
Take care of adjacent crops, since damage is possible. |
– |
– |
| WP744 |
Damage possible to adjacent woody plants. |
– |
– |
| NT146 |
Travelling speed must not exceed 7.5 km/h during application. |
– |
– |
| NT145-1 |
The product must be applied using a water volume of at least 300 l/ha. The product must be applied using equipment which is registered in the index of 'Loss Reducing Equipment' of 10 Sep-tember 2013 (Federal Gazette AT 23.10.2013 B4) as amended, at least in drift reduction class 90 %. Deviating from the specifications in the index of 'Loss Reducing Equipment', the terms for use must be observed for the entire area to be treated. |
– |
– |
| NT152 |
The product may only be used on areas which have been included in an accurate application plan which contains details of the seeding date, the planned and the actual timing of application, the application rate, the amount of water and application techniques. The operator must carry the plan with him during treatment in case of a check. |
– |
– |
| NT153 |
If they have requested to be informed, neighbours who may be exposed to drift must be informed of the planned application at the latest one day before plant protection products containing clomazone are used. |
– |
– |
| NT155 |
When using the product, a buffer zone of 50 m must be kept to urban areas, home and allotment gardens, areas with known clomazone-sensitive crops (e.g. vegetables, berries) and areas which are intended for the general public. This buffer zone must also be kept to areas intended for production according to Regulation (EC) No 834/2007 (regulation on organic farming) and according to the regulation on dietetic foods. A distance of at least 5 m must be kept to all other adjacent areas (except areas |
– |
– |
| NW605-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from su |
– |
– |
| NW606 |
The only case in which the product may be applied without loss reducing equipment is when at least the buffer zone stated below is kept from surface waters - except only occasionally but including periodically water bearing surface waters. Violations may be punished by fines of up to 50 000 Euro. |
– |
5 m
|
| WH9161 |
The instructions for use must include a summary of weeds which can be controlled well, less well and insufficiently by the product, as well as a list of species and/or varieties showing which crops are tolerant of the intended application rate and which are not. |
– |
– |
